JSfirm Avionics Jobs

Avionics with A&P - Heavy Troubleshooting Exp on Corp Aircraft

Wed, 17 Mar 2010 20:29:00 UT

Wings Aviation Technical Services, Inc. Chino, California:
Wings Aviation Technical Services, Inc. is accepting applications for a highly qualified Avionics Technician with A&P.

Are you a good troubleshooter? Then you may be someone we�re looking for. We are seeking an Avionics Technician with A&P License with the following experience;

Challenger 300, 604 and 605

Learjet 40, 45 and 60

Hawker 400, 800 and 800XP

We offer good pay based on experience.

If you have experience with the above types of aircraft then please contact us. Submit your resume via e-mail to wingsaviationts@msn.com or via fax to (866) 737-0905.

DIRECTOR OF FLIGHT OPERATIONS

Wed, 17 Mar 2010 20:02:00 UT

CALSTAR SACRAMENTO, California:
California Shock Trauma Air Rescue (CALSTAR) is a nonprofit regional air ambulance service. Our mission is to save lives, reduce disability and speed recovery for victims of trauma and illness. CALSTAR has an immediate opening for a full time: DIRECTOR OF FLIGHT OPERATIONS The CALSTAR Director of Flight Operations has overall responsibility for the safe and efficient conduct of CALSTAR EMS flight operations. He or She is authorized to exercise operational control over all flights conducted under the regulatory requirements of CFR 14, part 135. The Director of Operations reports directly to the Chief Services Officer, his or her Specific duties are as follows: 1) Assists the Chief Services Officer in formulating plans and policies. 2) Directs the execution of CALSTAR policies, establishes operations, personnel and equipment standards. 3) Schedules aircraft to the available flight crew and establishes personnel duty hours. 4) Obtains the necessary diplomatic clearances prior to departure for all flights into or over foreign countries and those countries listed in the Operations Specifications. 5) Is responsible for the distribution of the CALSTAR Operations Manual or portions of it to those persons listed on the Table of Distribution. 6) Supervises distribution and posting of all information or memorandum relative to any changes affecting Company policy route information, navaids, NOTAMS, requisitioning of flying aids, aeronautical charts, etc. 7) Ensures prompt reporting, filing and follow-up action on accident reports to the appropriate FAA agencies. 8) Prepares reports, and correspondence pertaining to operations activities. 9) Submits to FAA all reports required, responsible for signing Operating Specifications. 10) May hire or dismiss any employee below him/her. 11) Designates sufficient check pilots to ensure all flight crews conform to standard procedures as outlined in applicable FAA Regulations and CALSTAR policies, and to ensure that all pilots maintain current route qualifications and receive proficiency checks as required by FAA and CALSTAR. 12) Performs other functions as directed by the Chief Services Officer. 13) He/she may delegate functions to other personnel, but retains overall responsibility, and is authorized by CALSTAR to exercise full operational control for each flight conducted by CALSTAR QUALIFICATIONS: The CALSTAR Director of Flight Operations (equivalent to the FAA required position of Director of Operations) shall have the following regulatory minimum qualifications and experience as listed in CFR 14, part 119.69 and 119.71(b): 1) Be qualified through training, experience, and expertise; 2) To the extent of their responsibilities, have a full understanding of the following material with respect to the CALSTAR operation� a. Aviation safety standards and safe operating practices; b. 14 CFR Chapter I (Federal Aviation Regulations); c. The certificate holder�s operations specifications; d. All appropriate maintenance and airworthiness requirements (e.g., parts 1, 21, 23, 25, 43, 45, 47, 65, 91, and 135 of this chapter); and e. The manual required by CFR 14 Part 135.21 (CALSTAR Part 135 Operations Manual); and Successful candidate must be able to pass a drug test. CALSTAR offers excellent benefits package, Medical, Dental and Vision, Profit Sharing Plan, and Life Insurance. Please send your resume to: resume@calstar.org or Fax to: (916) 929-6640 CALSTAR is an equal employer opportunity

Avionics Specialists

Wed, 17 Mar 2010 18:51:00 UT

Spencer Reed Group, LLC � Aero Jobs-SRG California/San Bernardino County, California:
Accepting resumes for Avionics Specialists. Experience in any of the following aircraft: B747, 757, 767, A319, 320, 321. Gen. Fam. not required but is a big plus. Must be able to pass DOT drug screening and background testing We require submittals to be as follows:

Resume must reflect the aircraft you claim to have experience in
Avionics � Certificates for FCC Radio, etc
Gen. Fam. Training records

Referral bonuses are paid for referrals where the candidates are accepted and stay beyond 30 days. Please e-mail Tara Gilbert at: Tara.Gilbert@spencerreed.com

Interior Aircraft Mechanics - Tucson, AZ

Wed, 17 Mar 2010 18:43:00 UT

PlaneTechs Tuscon, Arizona:

Experience Aircraft Interior Mechanic

Primary Responsibilities

removal, disassembly, cleaning, inspection, repair, re-installation of aircraft cabin furnishings
fabric recovery
upholstery
carpet laying
cabinetry, etc.

Avionic Technicians - Oklahoma City, OK

Wed, 17 Mar 2010 18:43:00 UT

PlaneTechs Oklahoma City, Oklahoma:

Avionic Technician

Job Description:

Within budgeted or estimated time, repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance.
Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents from both the customer and company.
Apply deductive reasoning to troubleshoot and repair and/or check complex systems.
Properly utilize Avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment.
Properly utilized and maintain Avionics hand tools to perform repairs and installations.
Keep leadership and co-workers apprised of work progress and/or problems.
Accurately document work performed as set forth by company and customer maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence.
Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors.
Take immediate corrective action regarding unsafe conditions.
Other duties may be assigned.
Operate ground support equipment e.g. power carts, Hi-Reach, etc. as required

Avionic Technicians - Mobile, AL

Wed, 17 Mar 2010 18:42:00 UT

PlaneTechs Mobile, AL, Alabama:

Avionic Technician

Job Description:

Within budgeted or estimated time, repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance.
Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents from both the customer and company.
Apply deductive reasoning to troubleshoot and repair and/or check complex systems.
Properly utilize Avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment.
Properly utilized and maintain Avionics hand tools to perform repairs and installations.
Keep leadership and co-workers apprised of work progress and/or problems.
Accurately document work performed as set forth by company and customer maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence.
Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors.
Take immediate corrective action regarding unsafe conditions.
Other duties may be assigned.
Operate ground support equipment e.g. power carts, Hi-Reach, etc. as required

Sheet Metal, Structural Aircraft Mechanics - Tampa, FL

Wed, 17 Mar 2010 18:40:00 UT

PlaneTechs Tampa, Florida:

Sheet Metal, Structural Aircraft Mechanic

Overview:

Document maintenance performed on required forms.
Must be able to accomplish any and all repairs, modifications, E.A.�s, etc, with very little to no assistance.
Must be able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Must be able to fabricate parts.
Perform maintenance IAW FAA approved technical data.
Research FAA technical data to locate applicable data relevant to assigned task.
Repair body or structure of aircraft according to specifications.
Reinstalls repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Locates and marks dimension and reference lines on defective or replacement part, using templates, scribes, compass, and steel rule.
Cures bonded structure, using portable or stationary curing equipment.
Communicates with other workers to fit and align heavy parts or expedite processing of repair parts.
Cleans, strips, primes, and sands structural surfaces and materials prior to bonding.
Repairs or fabricates defective section or part, using metal fabricating machines, saws, brakes, shears, and grinders.
Removes or cuts out defective part or drills holes to gain access to internal defect or damage, using drill and punch.

Sheet Metal, Structural Aircraft Mechanics - Madison, MS

Wed, 17 Mar 2010 18:39:00 UT

PlaneTechs Madison, Mississippi:

Sheet Metal, Structural Aircraft Mechanic

Overview:

Document maintenance performed on required forms.
Must be able to accomplish any and all repairs, modifications, E.A.�s, etc, with very little to no assistance.
Must be able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Must be able to fabricate parts.
Perform maintenance IAW FAA approved technical data.
Research FAA technical data to locate applicable data relevant to assigned task.
Repair body or structure of aircraft according to specifications.
Reinstalls repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Locates and marks dimension and reference lines on defective or replacement part, using templates, scribes, compass, and steel rule.
Cures bonded structure, using portable or stationary curing equipment.
Communicates with other workers to fit and align heavy parts or expedite processing of repair parts.
Cleans, strips, primes, and sands structural surfaces and materials prior to bonding.
Repairs or fabricates defective section or part, using metal fabricating machines, saws, brakes, shears, and grinders.
Removes or cuts out defective part or drills holes to gain access to internal defect or damage, using drill and punch.

Avionic Technicians-Los Angeles,CA

Wed, 17 Mar 2010 18:39:00 UT

PlaneTechs Los Angeles, California:

Avionic Technician

Job Description:

Within budgeted or estimated time, repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance.
Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents from both the customer and company.
Apply deductive reasoning to troubleshoot and repair and/or check complex systems.
Properly utilize Avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment.
Properly utilized and maintain Avionics hand tools to perform repairs and installations.
Keep leadership and co-workers apprised of work progress and/or problems.
Accurately document work performed as set forth by company and customer maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence.
Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors.
Take immediate corrective action regarding unsafe conditions.
Other duties may be assigned.
Operate ground support equipment e.g. power carts, Hi-Reach, etc. as required

Avionic Technicians - Mobile, AL

Wed, 17 Mar 2010 18:39:00 UT

PlaneTechs Mobile, AL, Alabama:

Avionic Technician

Job Description:

Within budgeted or estimated time, repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance.
Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents from both the customer and company.
Apply deductive reasoning to troubleshoot and repair and/or check complex systems.
Properly utilize Avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment.
Properly utilized and maintain Avionics hand tools to perform repairs and installations.
Keep leadership and co-workers apprised of work progress and/or problems.
Accurately document work performed as set forth by company and customer maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence.
Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors.
Take immediate corrective action regarding unsafe conditions.
Other duties may be assigned.
Operate ground support equipment e.g. power carts, Hi-Reach, etc. as required