Becoming a 30104 Assembler Electrical Installer at The Boeing Company is an exciting opportunity to assemble and install the critical wiring and equipment that makes the aircraft function.
As a 30104 Assembler Electrical Installer you will work within a final assembly environment by drawing on knowledge acquired from training and certification classes to complete your daily assigned work. By interpreting drawings and reading/comprehending work instructions you will be responsible for identifying your work (task) location on the airplane/part/tooling and identifying all required hand tools, parts and equipment to accomplish defect-free work.
For an Assembler Electrical Installer, daily assigned work could include:
Within the Final Assembly environment:
1.Use a computer in a production environment.
2.Look up/read/comprehend technical work instructions, drawings and/or specifications.
3.Route, clamp and tie various lengths of wire bundles following specific wires paths as shown on drawings and install/connect necessary equipment, ground studs, bonding straps and connectors.
4.Install various assemblies as required such as: blankets, seats, stowbins, floor panels etc.
Depending on your work environment and assigned work the following tools and materials might be used:
1.Appropriate protective clothing/equipment determined by the task you are performing.
2.Operate mechanical lifts of various types (e.g., scissors lifts, elevated work platforms).
3.Various tools such as screwdrivers, power screwdriver, ratchet wrench, nut runner, drills, wire cutters, wire crimps, soldering gun and various other hand tools.
4.Chemical solvents, sealants, coatings, primers, adhesives, paints and special finishes.
Once your work is completed per testing requirement youll inspect your work for quality and check for FOD (Foreign Object Debris).
The daily Physical Demands experienced are dependent upon your work environment, but most Assembler Electrical Installers can experience:
1.Frequent (3-6 Hrs.) Handling (holding, grasping), Kneeling, Sitting, Standing, Walking.
2.Working around energized sources (electrical equipment and hazards/shock, e.g. circuit breakers and wiring) and exposure to constant noise.
3.Flexion/extension (head bent down, head bent back), finger manipulation, handling, kneeling, bending at the waist, reaching (overhead), Lying down (back, side, front), rotation of head/neck, standing, twisting at the waist, walking.
4.Climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), Crawling, Crouching (squatting).
5.Lifting and carrying up to 10-35 pounds.
6.Finger manipulation (keyboarding, other).
7.Reading from a computer screen, printed drawings or documents.
This is an hourly position governed by the IAM Collective Bargaining agreement.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. 120.15 is required.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.