The Aircraft Mechanic 3 performs the full range of military tactical aircraft maintenance functions including assembly and modification on the assigned aircraft (AH-64, CH-47 and/or UH-60), their major assemblies, sub-assemblies, components, and related systems.
(Typical duties include the following, although specific duties vary by assignment or contract.)
Perform the full range of military tactical aircraft maintenance.
Install, connect, and adjust complete systems such as fuel, heat, lubrication, hydraulic, engine, and transmission: install and align fuselage parts; balances, aligns, and installs tail rotor assemblies; rig complete flight control systems.
Incorporate authorized modifications and changes.
Make operational checks of hydraulic and fuel systems using external power sources and powered ground equipment.
Inspect and troubleshoots to determine cause of malfunctions; disassembles to point of trouble; adjusts, repairs, realigns or replaces defective component or assembly.
Direct the work of lower-graded mechanics for complete assembly, modification and checkout of the entire aircraft and coordinates with related trades such as electrical, avionics, and sheet metal to assure proper sequence of the complete aircraft assembly process.
Knowledge of the makeup, operation, installation and modification of a wide variety of classes, models and series of aircraft, their major assemblies, sub-assemblies, components and related systems.
Technical knowledge of the aircraft models and components/sub-assemblies assigned for maintenance, modification and repair.
Ability to assemble a variety of system assemblies, and sub-assemblies such as fuel and hydraulic systems, tail boom assemblies, and the power train. Must be able to connect, mesh, align and adjust the system with one another and to determine the sequence of installation of these systems for proper coordination of the entire aircraft assembly process.
Able to properly use a variety of common hand tools and measuring devices such as gauges, torque wrenches and scales and test, measurement and diagnostic equipment related to specific aircraft models.
Able to trouble shoot and determine when faulty systems or assemblies can/can’t be corrected through repair of replacement of new parts and the nature and extent of repair required.
Perform other qualified duties as assigned.
Minimum Requirements:
High School Graduate or equivalent is required.
U.S. military technical school or specialized training course is desired.
UH60A/L experience is a requirement.
UH60M Experience Preferred but not a prerequisite.
Valid FAA A&P or FCC License preferred, and Two (2) years aviation maintenance experience, three (3) years rotary wing aircraft experience, and Two (2) years on the assigned UH-60 (MDS).
All experience must be within the Five (5) most recent years is required.
If No A&P or FCC License, must have the following experience:
Three (3) years aviation maintenance experience, two (2) years rotary wing aircraft experience, and Two (2) years on the assigned UH-60 MDS.
All experience must be within the Six (6) most recent years.
Must have a Valid US Passport, with a minimum of 18 months remaining to expiration.
Ability to obtain/maintain Security Clearance (NAC-I T1) Public Trust. Interim NACI approved to start. US Citizenship is required to obtain facility credentials and Public Trust Clearance.
Travel: As required in support of task order.
Preferred Qualifications:
Knowledge & Skills
Shall possess the level of experience necessary to inspect all required aeronautical type maintenance to be performed by skill class Mechanic I and II and must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions.
Shall have a thorough knowledge of aircraft mechanical component troubleshooting, diagnosing problems, repair procedures and replacement of parts requires broad knowledge of aircraft sheet metal/structural modifications and repair.
Shall have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
Shall have a working knowledge of making entries in aircraft logbooks & records, military technical publications, utilizing the Armys Logistics Information System (e.g., ACN, ULLS-A).
Shall have a basic knowledge of aircraft sheet metal and structural modification and repair.
Shall have the ability to determine functionality of non-complex electrical systems.
Shall have a detailed knowledge of aircraft unique tools such as cable tensiometers.
Ability to read, apply and interpret technical data.
U.S. military technical school or specialized training course is desired
Physical Requirements/Working Environment
Must be able to climb, stand, stoop, bend, stretch, crouch, and work in tiring and uncomfortable positions.
Frequently lift parts and equipment up to 20 pounds.
Occasionally lift objects up to 50 pounds.
Must be immediately deployable to potential combat areas worldwide.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans and Labor Laws Posters.
