This position serves as a PMI and is located in Anchorage, Alaska.This is not a 100 telework position. Situational telework may be available based on the needs of the Office. Duties
JSfirm
Aviation Safety Inspector (AW General Aviation - Maintenance)
Job Description:

This position serves as a PMI and is located in Anchorage, Alaska.

This is not a 100 telework position. Situational telework may be available based on the needs of the Office.

Duties

The Aviation Safety Inspector (ASI) receives administrative direction from management in terms of broadly defined missions or functions. The ASI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The ASI provides policy assistance to field level ASIs on difficult or complex policy interpretations. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled.

ASIs at the FG-13 level issue certificates to and monitor (1) a large and complex aviation organization or (2) a number of smaller organizations that, together, are comparable in complexity to one large one. They are the primary contact point with the aviation organization(s). They may decide on issuance of the original certificates. They evaluate and decide upon proposals to change the authorized programs of the organizations. They continuously monitor the activities of organizations to determine whether they are following their authorized program, Federal regulations, and good safety practices.

FG-13 assignments are characterized by one or more of the following:

  1. Commercially operated aircraft or and the complex avionics equipment associated with such aircraft;
  2. A variety of maintenance operations with diverse types of aircraft; or
  3. Novel and complex aviation operations.

FG-13 employees plan and conduct their assignments with substantial technical independence. They receive administrative and policy guidance from their supervisors and policy makers. They also obtain technical advice from higher-level inspectors who are experts on a particular type of aircraft or who have overall program responsibility. They independently plan and carry out a work program to meet the needs and monitor the activities of the organizations for which they have certification responsibility. The scope and complexity of the work program may be such as to require the occasional assistance of other employees to conduct inspections and evaluate operations.

The ASI applies a mastery knowledge level of the appropriate specialization and a broad knowledge of the line of business mission and goals to assigned programs and areas of responsibility.

The ASI plans and directs the use of time and resources to accomplish organizational objectives. He or she defines, organizes, and uses resources to accomplish work activities within established schedules, analyzes program requirements and accomplishments, and makes or directs adjustments as necessary to address organizational needs.

Guidelines and precedents are frequently inadequate for dealing with novel or complex operations. FG-13 employees understand and apply the basic principles of aviation safety and interpret the intent of the regulations.

ASIs at the FG-13 level participate extensively in the certification inspection and surveillance of highly complex air carrier operations where principal program responsibility is vested in an aviation safety inspector of higher grade. These FG-13 employees have broad authority to negotiate with carrier management and make technical determinations within the coverage of approved specifications and policy manuals.

The ASI provides guidance to field level staff to solve difficult technical issues. Resolves all but unique problems, with the intervention of management or a more experienced technical specialist. Develop plans, techniques, and policies to address current and anticipated problems and issues. Works with management to solve problems.

The ASI keeps management informed of all programs and projects and is held accountable for the technical accuracy, proper coordination, and timeliness of completed staff work. Provides staff assistance and serves as advisor to the manager on all matters pertaining to assigned tasking. Assists Safety Assurance ASIs, aviation safety technicians, and others on queries that are technical or guidance related.

Performs other duties as assigned.

Job Requirements:
Requirements Conditions of Employment
  • US Citizenship is required.
  • Selective Service Registration is required for males born after 12/31/1959.
  • Must submit an SF50 (See Required Documents).
  • Position is designated as Moderate Risk; a background investigation may be required
Qualifications

General Requirements for All 1825 Positions:

  1. Not more than two separate incidents involving Federal Aviation regulations violations in the last 5 years
  2. Valid State driver's license
  3. Fluency in the English language
  4. No chemical dependencies or drug abuse that could interfere with job performance, and
  5. High School diploma or equivalent.

Medical Requirements for All Positions:

Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, with or without a reasonable accommodation. The minimum medical requirements include the following requirements:

  1. Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted);
  2. Have the ability to hear the conversational voice (hearing aid permitted); and
  3. Not have any physical condition that would cause them to be a hazard to themselves or others that would interfere with their ability to fly as passengers in a variety of aircraft.

In addition, applicants for positions that require participation in the operation of the aircraft must:

  1. Possess a valid second – class medical certificate in accordance with FAA regulations; and
  2. Pass recurrent medical examinations as prescribed by the FAA.

Applicants not requiring valid second-class medical certificates who are tentatively selected will be required to:

  1. Provide documentation from a board-certified physician certifying that they meet the minimal medical requirements; or
  2. Individuals who do not meet the minimum medical requirements but who are otherwise qualified will receive an individualized assessment to determine whether they can perform the essential functions of the position.

When the predominant work involves general aviation maintenance, applicants for Aviation Safety Inspector (Airworthiness) positions must meet all of the following requirements.

  1. Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness.
  2. Maintenance experience with aircraft 12,500 pounds or less maximum certificated takeoff weight.
  3. Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state or Federal governmental agency.
  4. Aircraft maintenance work experience within the last 3 years.
  5. FAA Mechanic Certificate with airframe and power plant ratings.

In addition, applicants must demonstrate in your application that you possess at least one year of specialized experience equivalent to the FV-H/FG-12 level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position.

Specialized experience is defined as: Assisting, conducting or performing various technical functions related to certification, surveillance, investigation and compliance recommendation of maintenance activities on FAR Part 135 air carriers/air operators.

For Lateral Movements Between 1825 Specialties:

To assist in determining qualification requirements, applicants transferring between specialties at the same grade level are strongly encouraged to complete the appropriate Qualifications Assessment Tool (QAT) check sheet and upload it along with their resume. Check sheets are contained in Order 3410.26, Flight Standards Service Air Carrier and General Aviation Qualifications Assessment Tool for AFS Aviation Safety Inspectors.

The recency of specialized experience is waived for current FAA employees in the 1825 series.

Applicants should include examples of specialized experience in their work history.

Qualifications must be met by the closing date of this vacancy announcement.

Errors or omissions may impact your rating or may result in you not being considered for the job.

Education

Education is not qualifying and cannot be substituted for this position.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.



IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.

Required Documents

If you need to submit additional documents to supplement your online application, e.g. transcripts, SF-50, or veterans' documentation, you may upload these documents with your application in USAJOBS. Supplemental documentation can also be faxed to 907-271-5367 on or before the closing date of this announcement. Please include your name and the vacancy announcement number on each of your faxed pages and redact all Personally Identifiable Information (PII), such as social security number and date of birth.



If you are an FAA employee, you MUST provide a copy of your SF-50 (Notification of Personnel Action) containing information in Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. You may fax your SF-50 or upload it into the on-line application. If faxing the SF-50, please ensure you include the vacancy announcement number on the faxed copy.

If you are an FAA employee, you can access and print your SF-50 from the eOPF system https://eopf.opm.gov/dot/.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Company Details
Federal Aviation Administration
800 Independence Ave, SW
Washington, DC 20591 USA
www.faa.gov/jobs
447 Open Jobs Available
Our continuing mission is to provide the safest, most efficient aerospace system in the world. We strive to reach the next level of safety, efficiency, environmental responsibility and global leadership. We are accountable to the American public and ...

Benefits:
TBD
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)
Job Info
Location
Anchorage, Alaska, United States
Type
Contractor
Salary Range
$116,811 - $151,858
Company Details
Federal Aviation Administration
800 Independence Ave, SW
Washington, DC 20591 USA
www.faa.gov/jobs
447 Open Jobs Available
Our continuing mission is to provide the safest, most efficient aerospace system in the world. We strive to reach the next level of safety, efficiency, environmental responsibility and global leadership. We are accountable to the American public and ...

Benefits:
TBD

JSfirm, LLC

Roanoke, TX

jobs@jsfirm.com

JSfirm LLC, Privacy Policy

All rights reserved. 2001-2024 JSfirm