JOB FUNCTION:
Evaluate each dimension of a casting and using the dimensional data, make a decision on the acceptance, rejection, or rework of that casting.
Interpret wall thickness readings with reference to applicable Quality Engineering Instructions. (QEI)
Must pass all testing requirements for both CMM and Wall Check.
Must be flexible to move from CMM and Wall check based on the demands of daily schedules.
SPECIFIC RESPONSIBILITIES for CMM :
Manufacturing and Dimensional Inspector Prerequisite Job Requirements- Ability to read the Quality Engineering Specification (QES) and apply it to the dimensional inspection and adjustment of a casting.
- A qualified CMM inspector must be able to consistently evaluate each dimension of a casting. Using the dimensional data he/she makes a decision on the acceptance, rejection, or rework of that casting based on the requirement stated in the QES.
- By accepting a part at dimensional inspection, the inspector accepts personal responsibility for the dimensional integrity of that part, here and at the customer.
- Basic math skills are a necessity. Must be able to add and subtract positive and negative integers. A good understanding of measurements in fractions of an inch (tenths, hundredths, thousandths) is required. Must be able to read digital/mechanical dial indicators and computer generated tolerances.
- Basic computer skills are required.
SPECIFIC RESPONSIBILITIES for Wall
- Assure parts are properly processed to the applicable NDT method specifications.
- Interpret wall thickness readings with reference to applicable Quality Engineering Instructions. (QEI)
- Perform set up and calibration of equipment.
- Move parts to proper department after Wall Check inspection is complete.
- Perform other duties specified by supervisor.
- Maintain a positive work atmosphere by behaving and communicating in a manner that gets along with customers, clients, co-workers, and supervisors.
EDUCATION:
High school education.
INITIATIVE AND INGENUITY:
Normal initiative and ingenuity.
EFFORT:
Physical Requirements: Must be able to push and pull a minimum of 10 to 35 force/lbs in order to move gages weighing from 20-35 lbs. Must be able to move gages weighing from 20-270 lbs. from one location to another (push and pull) using a gage cart. This job also involves some heavy lifting (up to 50 lbs). Repetitive casting adjustment is required throughout the workday (push and pull).
RESPONSIBILITY:
Make sure parts meet quality standards. Must be willing to work daily overtime and weekend overtime as necessary.
JOB CONDITIONS:
Good working conditions, dusty, noisy.
THE ABOVE COVERS THE MOST SIGNIFICANT DUTIES, BUT DOES NOT EXCLUDE OTHER ASSIGNMENTS REQUIRING EQUIVALENT OR LESSER SKILLS.
PCC Airfoils, LLC is an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability.